You are on the drivers site: servicing, prices and bookings.Run a workshop or sell oil? Go to the dealer portal →
HomeTyre replacementTyre size and quote checklist
Buyer guide

Reading your tyre size and getting a quote

How to read the markings on your tyre sidewall, check your vehicle's requirements, and prepare a clear replacement quote brief for the workshop.

What the numbers on a tyre mean

Look for the size code on the tyre sidewall. Take 205/55R16 as an example. 205 is the nominal width in millimetres. 55 is the aspect ratio: the sidewall height expressed as a percentage of the width. R indicates radial construction, the standard type for passenger vehicles. 16 is the rim diameter in inches.

This code describes the tyre dimensions and construction. Two tyres with the same size code can still differ in load capacity, speed rating and internal construction, so matching dimensions alone does not confirm that a tyre is suitable for your vehicle.

If you cannot find the vehicle manual or door placard, you can read the size code directly from the tyre sidewall, but always verify it against the manufacturer's stated requirements before using it as the basis for a quote.

Source: Michelin tyre markings explained

Load index and speed rating

Immediately after the size code you will find additional markings, for example 91V. The number (91) is the load index: a standardised code representing the maximum weight each tyre can support at a specified inflation pressure. The letter (V) is the speed rating: a code for the maximum sustained speed under controlled test conditions.

Check the vehicle manual, placard or manufacturer information for the required load index and speed rating, and ask the workshop to confirm that the replacement meets those requirements. Matching the size code alone does not establish suitability.

Source: Michelin load and speed ratings

Where to find your vehicle's tyre requirements

The approved tyre specifications for your vehicle are in the owner's manual or on the tyre information placard, usually located on the driver's door frame or inside the fuel filler cap. The manual may list more than one approved size if the vehicle was offered with different wheel options or for different driving conditions.

Do not assume the tyres currently fitted to your vehicle are the approved specification. If the wheels or tyres have been changed by a previous owner or workshop, the fitted size may differ from what the manufacturer requires. Ask the workshop to verify applicability against the vehicle's stated requirements before fitting new tyres.

Source: Michelin choosing tyres for your car

Your tyre quote brief

A prepared brief helps you request a comparable quotation from any workshop. Copy this list before you call or message. Printing this page produces the quote checklist and comparison questions.

  • Vehicle make and model (as shown on the registration card)
  • Model year
  • Tyre size from placard or manual (example format: 205/55R16)
  • Load index and speed rating (example: 91V)
  • Number of tyres needed
  • Preferred workshop or area
  • Preferred day and time slot
  • Brand preference or budget range (or open to the workshop's recommendation)

Providing the size from the manual or placard, rather than only the car model, helps the workshop quote accurately on the first reply. Include the load index and speed rating so the quotation covers a tyre that meets your vehicle's full requirements.

The workshop confirms the applicable tyre specification, available stock, total price and appointment slot. At DTOX, size and brand determine the price; the workshop confirms the quotation before your visit.

Questions to ask about a quotation

When comparing quotations from different workshops, ask what the quoted price includes. Workshops handle these items differently, and a lower headline price may not cover the same scope of work.

  • Does the price include fitting and balancing?
  • Are new valve stems or TPMS sensor service included?
  • Is disposal of the old tyres included?
  • Is wheel alignment included, or is it quoted separately?
  • What payment methods are accepted, and is a deposit needed to hold the appointment?

These are comparison questions to help you evaluate quotations side by side. Each workshop sets its own inclusions and pricing structure.

DTOX tyre replacement

All four DTOX workshops in the Klang Valley offer tyre replacement: Dpulze Cyberjaya, PJ Seksyen 8, Sunway Wangsa Mall and Taman Melawati. Send the tyre size or your car model and the workshop confirms the price and the appointment slot.

Dalam Bahasa Malaysia Kod saiz tayar seperti 205/55R16 menunjukkan lebar (205 mm), nisbah aspek (55%), binaan radial (R) dan diameter rim (16 inci). Semak manual kenderaan atau plakad pintu untuk saiz tayar dan penarafan beban serta kelajuan minimum yang diluluskan. Jangan anggap tayar yang dipasang sekarang semestinya betul jika roda pernah ditukar. Sediakan butiran kereta, saiz tayar, penarafan dan bilangan yang diperlukan sebelum meminta sebut harga. Di DTOX, saiz dan jenama menentukan harga dan bengkel mengesahkan sebut harga serta slot sebelum lawatan anda.

Book tyre replacement
Related

Next steps